- Web-based firmware (https://venom.how/)
- RISC-V32 architecture applied
- Supports 8KHz polling rate / 14KHz scan rate per key
- 0.16ms latency
- Custom PCB standard specifications
- Daughterboard and JST connector included
KBDfans x Geonworks Venom 60 HE Gaming Keyboard Kit
$65.00
SKU:
DP7608
Product Features
Product Malfunction Check Points
- Use USB 2.0 high-speed or higher A TO C cable
- USB hub not recommended
- Use Chrome browser
- Initialize USB driver
- Firmware upgrade or factory reset
Friendly reminder
- All products are made in the size of GH60, which is the standard in the custom keyboard sector.
- Before you start assembling the PCB, please carry out a PCB test and check if all keys function.
- Before assembling the screws, remove the yellow tape on the stand-offs of PCBs.
- Whether or not to use foam sets is optional.
- To assemble the PCB and the plate, you must use all 8 screws.
- After removing the C-type port once, you cannot put it on again.
- Remove the daughter board installed above the arrow keys before usage, since electricity may go through.
- Daughter board and C-type ports are made of FR-4, which means you must use a nipper. If you use tools made for other uses such as scissors, the product may be damaged.
-
For JST cables, you need to use a cable with the same pin layout on both ends.
Compatible Switches
- RAPTOR HE
- RAW HE
- Lucifer HE
- GATERON KS-20 / KS-20T, etc.
- N-pole switch, 1600gs or less at bottom magnetic force
Compatible Stabilizers
- PCB mounted
Specs
Venom HE 60% 6.25U PCB
- Type : Hall effect
- Material : FR4
- Thickness : 1.6mm
Venom HE 60% 7U PCB (Tsangan Layout)
- Type : Hall effect
- Material : FR4
- Thickness : 1.6mm
Layout
6.25U space bar
7U space bar
Cases options
It is compatible with various cases, providing flexible options to meet the needs of different users.
Product Features
- Web-based firmware (https://venom.how/)
- RISC-V32 architecture applied
- Supports 8KHz polling rate / 14KHz scan rate per key
- 0.16ms latency
- Custom PCB standard specifications
- Daughterboard and JST connector included
Product Malfunction Check Points
- Use USB 2.0 high-speed or higher A TO C cable
- USB hub not recommended
- Use Chrome browser
- Initialize USB driver
- Firmware upgrade or factory reset
Friendly reminder
- All products are made in the size of GH60, which is the standard in the custom keyboard sector.
- Before you start assembling the PCB, please carry out a PCB test and check if all keys function.
- Before assembling the screws, remove the yellow tape on the stand-offs of PCBs.
- Whether or not to use foam sets is optional.
- To assemble the PCB and the plate, you must use all 8 screws.
- After removing the C-type port once, you cannot put it on again.
- Remove the daughter board installed above the arrow keys before usage, since electricity may go through.
- Daughter board and C-type ports are made of FR-4, which means you must use a nipper. If you use tools made for other uses such as scissors, the product may be damaged.
-
For JST cables, you need to use a cable with the same pin layout on both ends.
Compatible Switches
- RAPTOR HE
- RAW HE
- Lucifer HE
- GATERON KS-20 / KS-20T, etc.
- N-pole switch, 1600gs or less at bottom magnetic force
Compatible Stabilizers
- PCB mounted
Specs
Venom HE 60% 6.25U PCB
- Type : Hall effect
- Material : FR4
- Thickness : 1.6mm
Venom HE 60% 7U PCB (Tsangan Layout)
- Type : Hall effect
- Material : FR4
- Thickness : 1.6mm
Layout
6.25U space bar
7U space bar
Cases options
It is compatible with various cases, providing flexible options to meet the needs of different users.
