Taco

$279.00
Case (no engraving version)
PCB version
SKU: ZH14678

TACO

Taco is a well known street meal, it's a portion of delicious, convenient and diverse food that people enjoy for decades.

No matter what your life circumstances are, a yummy taco always can bring you back to the day one moment.

That is also the feature we want to bring with the Taco 75% design this time. A minimalist keyboard that throws you back to the day when you first ever fall into the mechanical keyboard world.

SPECS

  • Typing angle: 8°
  • Structure: Top mount/Silicone bowl gasket
  • Case Material: Aluminum case (Bottom case with acrylic layer, supports RGB light effect),
    Pure black kit: Anodized Black case + Stainless steel weight with Black PVD coating (no engraving version)
    Other kits: Anodized/E-coating case + Sandblasted Brass weight bar (no engraving version)
  • PCB: 1.2 mm Non-flex cut Hot-swap PCB/1.6 mm Non-flex cut Solder PCB, USB-C, supports VIA/QMK, with daughterboard+JST cable
  • Weight bar: Sandblasted Brass/PVD Stainless Steel Weight
  • Plate: Non-flex cut Polycarbonate, Flex cut FR4/Carbon fiber/Aluminum Black
  • Weight: ~2.5 kg (built with stainless steel weight bar)
                ~ 2.6 kg (built with brass weight bar)
     
  • Case screws: M2.5*6 mm, Torx size T8
  • Designed by KBDfans
  • Keycaps:  Keycaps: PBTfans SUBARASHĪ - Base kit (PT22-1)

Include

Price of the kit $348 (Anodized colors)/$368(E-white)/$418(Pure black) includes below items:

  • Case x1
  • Weight bar x1
  • PCB x1
  • Foam kit x1 (Bottom poron+Plate poron+EVA switch pad)
  • Silicone bowl x1 set (50g 60g 70g )
  • Screws and rubber feet x1 set
  • Keycap set x1
  • Stabilizers x1

The following accessories should be purchased separately and added to the cart with the kit together:

  • Plate x1

Reminder:

  • Only Pure black kit: Anodized Black case + Stainless steel weight with Black PVD coating (no engraving version)

Firmware

Disclaimer

1. The pictures on the page are for reference only. Colors in the final product may vary since renders are done under idealistic artificial lighting.

2. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.

3. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.

4. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund.

5. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's.

Attention:
-Make sure to QC your keyboard case and weight before building it. For any issues besides above, please get in touch with our customer support agents to get help.
-For anything built is not eligible for Return & Refund.

Reminders before assembly

SPECS

  • Typing angle: 8°
  • Structure: Top mount/Silicone bowl gasket
  • Case Material: Aluminum case (Bottom case with acrylic layer, supports RGB light effect),
    Pure black kit: Anodized Black case + Stainless steel weight with Black PVD coating (no engraving version)
    Other kits: Anodized/E-coating case + Sandblasted Brass weight bar (no engraving version)
  • PCB: 1.2 mm Non-flex cut Hot-swap PCB/1.6 mm Non-flex cut Solder PCB, USB-C, supports VIA/QMK, with daughterboard+JST cable
  • Weight bar: Sandblasted Brass/PVD Stainless Steel Weight
  • Plate: Non-flex cut Polycarbonate, Flex cut FR4/Carbon fiber/Aluminum Black, not support stepped caps
  • Weight: ~2.5 kg (built with stainless steel weight bar)
                ~ 2.6 kg (built with brass weight bar)
     
  • Case screws: M2.5*6 mm, Torx size T8
  • Price range: 278 USD ~ 348 USD
  • Designed by KBDfans

Taco Pad

Disclaimer

1. The pictures on the page are for reference only. Colors in the final product may vary since renders are done under idealistic artificial lighting.

2. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.

3. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.

4. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund.

5. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's.

Attention:
-Make sure to QC your keyboard case and weight before building it. For any issues besides above, please get in touch with our customer support agents to get help.
-For anything built is not eligible for Return & Refund.

Reminders before assembly

Update

  • Start flfiling orders.(2023-10-17)
  •  Will finish production around Oct 15th.(2023-09-25)
  • Will ship around the end of September (2023-08-29)
  • Estimated shipping date: September, 2023
  • In Production(2023-5-26)
  • R2 prototype approved(2023-4-15)

• The R1 prototype has been produced and still needs to be adjusted. The R2 prototype is in production now. (2023-03-16)

Include

Price of the kit $259 (Anodized colors)/$279(E-white)/$329(Pure black) includes below items:

  • Case x1
  • Weight bar x1
  • PCB x1
  • Foam kit x1 (Bottom poron+Plate poron+EVA switch pad)
  • Silicone bowl x1 set (50g 60g 70g )
  • Screws and rubber feet x1 set

The following accessories should be purchased separately and added to the cart with the kit together:

  • Plate x1

Reminder:

  • Only Pure black kit: Anodized Black case + Stainless steel weight with Black PVD coating (no engraving version)
  • Stabilizers are not included

Firmware

*The installation method of the rubber feet has been changed, and the actual released version is different from the video demonstration

Top-mount

Structure

- for anyone who is looking for a stiff typing experience,
also it is known as OG mechanical keyboard mounting style preference.

Silicone bowl gasket

Structure

Provide 50g/60g/70g pressure silicone bowls

- for anyone who is looking for a bouncy typing experience.

Multiple Plates

Polycarbonate

Aluminum

Carbon fiber

FR4

Non-flex cut Polycarbonate plate,
Flex cut Aluminum/Carbon fiber/FR4 plate,
Provide different typing experience depends on the different materials

Bouncy typing from hard to soft:
Aluminum > Carbon fiber > FR4 > Polycarbonate

Hot-swap & Solder PCB

Hot-swap & Solder PCB

We cancelled the Flex cut on Taco 75's PCB design this time to provide a better typing sound experience
if you don't want to put any foams during your keyboard build.

QMK/TMK firmware Programmable: can configure keyboard with the online VIA tool

Non-flex cut 1.2 mm Hot-swap PCB & 1.6 mm Solder PCB

Support the open source daughterboard

Caps lock LED indicator on the top only and partial RGB underglow

Explosion diagram

Compared with Odin75, Taco has a more compact layout

 

The inspiration for the keyboard back design was from the modern car's rear design

 

All CNC 6063 aluminum case

Anodize finish would be way better now by using the new production method

 

Sandblasted Brass non-Taco icon (Default weight bar)
Stainless steel PVD mirrored Black non-Taco icon (Pure black kit)

Top-mount

Structure

- for anyone who is looking for a stiff typing experience,
also it is known as OG mechanical keyboard mounting style preference.

Silicone bowl gasket

Structure

Provide 50g/60g/70g pressure silicone bowls

- for anyone who is looking for a bouncy typing experience.

Multiple Plates

Polycarbonate

Aluminum

Carbon fiber

FR4

Non-flex cut Polycarbonate plate,
Flex cut Aluminum/Carbon fiber/FR4 plate,
Provide different typing experience depends on the different materials

Bouncy typing from hard to soft:
Aluminum > Carbon fiber > FR4 > Polycarbonate

Hot-swap & Solder PCB

We cancelled the Flex cut on Taco 75's PCB design this time to provide a better typing sound experience
if you don't want to put any foams during your keyboard build.

QMK/TMK firmware Programmable: can configure keyboard with the online VIA tool

Non-flex cut 1.2 mm Hot-swap PCB & 1.6 mm Solder PCB

Support the open source daughterboard

Caps lock LED indicator on the top only and partial RGB underglow

Explosion diagram

Compared with Odin75, Taco has a more compact layout

The inspiration for the keyboard back design was from the modern car's rear design

All CNC 6063 aluminum case

Anodize finish would be way better now by using the new production method

Sandblasted Brass non-Taco icon (Default weight bar)
Stainless steel PVD mirrored Black non-Taco icon (Pure black kit)